Asked by mark on 02/27/2009 2  Answers

ManualsOnline posted an answer 15 years, 9 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
5 egistration The handset and base will be pre-registered with a digital security code identification, which is stored in the phone’s memory, so that your phone will be ready to work right out of the box. However, your phone also has a procedure to allow you to re-register in case the link is lost accidentally. - Enter menu, press the key - Select REGISTER and confirm - PIN CODE will be displayed, enter the PIN code (the default value is 0000) and confirm. - SEARCHING will be displayed while your handset is in registration mode - Press and hold the Page key for 3 seconds on the base until the “In use” LED is ON, putting the base in registration mode - SUCCESS will be displayed. This means the handset has located the base, and will get a handset number from the base that displays after the handset name for internal calling. - If the handset does not locate the base, FAILED will be displayed and it will return to the non-located display mode that displays BS SEARCH with the antenna icon flash. Try again and check that you are not in an environment with interference. Note: Your base can register up to four handsets. If you have more than one handset, repeat the above steps to register each new handset. Intercom between Handsets - From one handset, press the key, then the handset number that you want to call. - The internally called handset will ring. - To answer the intercom call, press or the key on the called party handset. - End the intercom call, press the or put your handset into the base cradle, the other handset will hang up automatically. Note: After the intercom call is established between two handsets, the third handset can still make or answer a call to the external line. YOU CAN DONATE 1 BUCK TO jpatton98@yahoo.com paypal for finding this info. i even have a copy ofthe manual 4 2 bucks
Was this answer helpful?
5 egistration The handset and base will be pre-registered with a digital security code identification, which is stored in the phone’s memory, so that your phone will be ready to work right out of the box. However, your phone also has a procedure to allow you to re-register in case the link is lost accidentally. - Enter menu, press the key - Select REGISTER and confirm - PIN CODE will be displayed, enter the PIN code (the default value is 0000) and confirm. - SEARCHING will be displayed while your handset is in registration mode - Press and hold the Page key for 3 seconds on the base until the “In use” LED is ON, putting the base in registration mode - SUCCESS will be displayed. This means the handset has located the base, and will get a handset number from the base that displays after the handset name for internal calling. - If the handset does not locate the base, FAILED will be displayed and it will return to the non-located display mode that displays BS SEARCH with the antenna icon flash. Try again and check that you are not in an environment with interference. Note: Your base can register up to four handsets. If you have more than one handset, repeat the above steps to register each new handset. Intercom between Handsets - From one handset, press the key, then the handset number that you want to call. - The internally called handset will ring. - To answer the intercom call, press or the key on the called party handset. - End the intercom call, press the or put your handset into the base cradle, the other handset will hang up automatically. Note: After the intercom call is established between two handsets, the third handset can still make or answer a call to the external line. YOU CAN DONATE 1 BUCK TO jpatton98@yahoo.com paypal for finding this info. i even have a copy ofthe manual 4 2 bucks
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.