1. Manuals
  2. Consumer Electronics Support
  3. Craftsman Support
  4. Sander Support
Support User Manuals
Question About Craftsman Sander 315.22590
changing belts...

how do I change belts

Asked by harry on 06/14/2008 1  Answer

ManualsOnline posted an answer 16 years, 5 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Gerhard posted an answer 16 years, 5 months ago

0 turn the unit upside down. Notice that the knob on the side of the unit makes the front roller turn left or right, depending on direction of turn. (I had to use pliers to turn it). Turn the front roller so that the open end moves toward the motor, therefore shortening its distance to the rear roller. To get the new belt on the rollers, you must push the innermost part of the front roller (idler) against a solid object like a stud or work bench. (Mine required a good amount of force). You may have to use your body to push it so one hand is free to slip the new belt over the rollers. now the belt should go on at least part way. At this point you can release the force and turn the knob to rotate the roller so its close to parallel with the rear roller. I found that the belt will move onto (or off of) the rollers the rest of the way when the unit is on and spinning. Using due caution (dont lost an appendage) adjust the knob so the belt moves into proper position on the rollers. There may be a safer way, let me know if there is.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual