1. Manuals
  2. Consumer Electronics Support
  3. Craftsman Support
  4. Yard Vacuum Support
Support User Manuals
Question About Craftsman Yard Vacuum 247.77012
type of oil...

What type of oil to use?

Asked by Dorothy Palmer on 10/17/2008 2  Answers

ManualsOnline posted an answer 16 years, 1 month ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Steve posted an answer 16 years ago

0 Briggs & Stratton has a website with information on these engines. 10W30 will work fine for most ambient temperatures. One thing is misleading about removing the drain plug for these engines on this leaf vacuum. That is you have to remove the oil filler tube to drain the oil. First start the engine to let the oil come up to operating temperature (let it run about 10 minutes). Then remove two phillips head screws that hold on a light brown plastic cover. Next, remove the three hex head fastners (1/4")that hold the fuel tank to the top of the engine and gently roll the tank backward (toward the push handle) If it doesn't roll backward very easily, loosten the tank retaining bolt at the bottom of the tank (you don't need to remove the fuel line to do this). Then remove the 1/4" bolt holding the oil filler tube and tilt the leaf vacuum on to its left side and drain the oil into a suitable container (I used a small plastic coffee can). Once the oil has drained, reassemble everything and add about 20 ounces of oil (about a pint). Check the dip stick and top it off as required.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual