1. Manuals
  2. Consumer Electronics Support
  3. Electrolux Support
  4. Ventilation Hood Support
Support User Manuals
Question About Electrolux Ventilation Hood RH36PC60GSA
How to set the clock...

How to set the clock

Asked by Val on 12/25/2014 2  Answers

ManualsOnline posted an answer 9 years, 10 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Online_Outreach_SPC posted an answer 9 years, 10 months ago

0 Thank you for your post, valente7! From what you have described you need assistance setting the clock on your Electrolux hood, RH36PC60GSA. Follow these steps to properly set your clock. 1. Your clock can be reprogrammed at any time except during an active timed function. 2. Your clock can be displayed in a twelve hour format and valid clock times are from 1:00 to 12:59. 3. You can program the clock by pressing the “Timer” button for 5 seconds, and after, the clock can be adjusted with the “Up” and “Down” buttons. Colon “:” will flash indicating clock programming mode. 4. The user can have minute increments / decrements of 1 minute, but if the user keep pressing the “Up”/”Down” buttons for more than 1 second, the increments / decrements will be of 5 minutes. 5. The user can finish on reprogramming the clock pressing the “Timer” button. 6. After 1 minute of no button pressed the control will accept the programmed clock time and will add one minute to the set clock. I hope this information has been helpful. –OOS
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual