1. Manuals
  2. Consumer Electronics Support
  3. Fisher & Paykel Support
  4. Dishwasher Support
Support User Manuals
Question About Fisher & Paykel Dishwasher DD603
remove drawers...

How do I remove the bottom drawer to dry the moisture that is causing the F1 problem.

Asked by Kathy on 07/18/2008 3  Answers

ManualsOnline posted an answer 16 years, 4 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Jason posted an answer 16 years, 1 month ago

5 The bottom draw can be removed to access the flood switch with out unplugging the drainage or wiring harnesses. At the very bottom of the draw on both front sides their are tabs to push in. the runners (like kitchen draw runners) slide back into the cabinet away from the whole draw assembly. re-installation is quite easy, make sure tabs reset and "Click" back in once refit. ###Remember to turn the power off and remove power from the mains outlet.### to reset the code "F1" you need to dry out the flood switch in the base of the cabinet. this occours due to overloading a draw,a leak or split drain hose. Good Luck - Hope this helps.!
Was this answer helpful?

peter Kay posted an answer 16 years, 4 months ago

5 Open the bottom drawer. At the side of the drawer toward the bottom there is a circle with a line in them on each side of the drawer. Turn these 45 degrees with some pliers and then release the plastic bits at the bottom of the drawer sliders. Once released your drawer should pull out
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual