1. Manuals
  2. Consumer Electronics Support
  3. Manitowoc Ice Support
  4. Ice Maker Support
Support User Manuals
Question About Manitowoc Ice Ice Maker QY0424A
Trouble- won't start....

Hello, My Ice machine has power, will go through the cleaning cycle, but will not begin ice making cycle. Got 2 flashes on the harvestlight. Where do I go from here? Please.

Asked by chris on 10/08/2008 3  Answers

ManualsOnline posted an answer 16 years, 1 month ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

lindsi posted an answer 16 years, 1 month ago

5 Two lights is long harvest time. There may not be enough water getting to the machine (if you have water filters check your pressure and see if they are clogged). Your ice thickness probe may be too far from the evaporator- try tightening it just a tad (should be about 3/8 in away from the evaporator, use an allen wrench between the evap & probe to check thickness). FYI- if you don't know, the evaporator is the steel grate the ice is formed on and the probe is the thing hanging in front of it.
Was this answer helpful?

chris posted an answer 16 years, 1 month ago

0 By the way, I manually activated the contactor and the compressor starts and runs, cools the ice plat/ tray
Was this answer helpful?

chris posted an answer 16 years, 1 month ago

0 By the way, I manually activated the contactor and the compressor starts and runs, cools the ice plat/ tray
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual