McCulloch Trimmer None Repair Manuel | ManualsOnline.com

Support User Manuals

The owners manual simply say to have a professional adjust the carb. There are 2 screws. I simply need the settings

Asked by Sam on 08/25/2008 8 Answers

ManualsOnline posted an answer 16 years, 3 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

William Jr posted an answer 16 years, 3 months ago

5 depending on whether or not the carburetor is zama or walbro, the websites give the screw settings. one screw is a high speed screw, the other screw is a low speed screw. My 2816 is equipped with the walbro carburetor. Walbro states to turn the screw all the way in til it bottoms out, the back the screws out 1 and 1/4 turn. Start the machine then adjust each screw by ear the rest of the way. low speed adjust at idle thil the engine runs smoothly. High speed run machine at full throttle and adjust til full throttle is smooth and it doesnt miss out.

Was this answer helpful?

Sam posted an answer 16 years, 3 months ago

4 On My machine there are whatI thoutht were the the mixture valves., one red and one white. Before I noticed the fuel line was broken I tried adjusting them. They donot move evn one turn let alone 1 and 1/4. Since I messed with them I need to know the proper position for these items. thanks sam

Was this answer helpful?

William Jr posted an answer 16 years, 3 months ago

4 Hi, If I recall correctly the color coded heads that You are referring to are actually tamper proof caps. Kind of in a "pac man" shape. Like the red and blue ones in the photo I have included. My 2816 has regular slotted screws shown in the second photo. If You managed to get those caps to move I would suggest trying to reurn them to the normal position, since they do not turn very far. The carburetor manufacturer installed these caps so the adjustments could not be changed. However, these caps sometimes can be removed. And photo 3 shows the screwss without the caps. The screws have a splined head which require a special tool, photos 4 and 5. I purchased this tool from my local small engine repair shop. The tool was a little under $5. That price im sure will vary from place to place. I have also seen them on ebay. You can then adjust the screws to the settings I explained about in the previous post. But I would find ut who the carburetor manufacturer is then look up the settings on the manufacturers website for the correct settings. Hope this helps.

Was this answer helpful?

William Jr posted an answer 16 years, 3 months ago

4 I guess I can only up;oad 1 photo per post. So I will make a few more posts. In this post is actually photo 1. My poulan chainsaw with the tamper proof caps. Sorry about the mistake.

Was this answer helpful?

William Jr posted an answer 16 years, 3 months ago

4 Here is a photo of my weedeater with the caps removed. photo 3

Was this answer helpful?

Sam posted an answer 16 years, 3 months ago

2 Or just setting instructions for carb

Was this answer helpful?

William Jr posted an answer 16 years, 3 months ago

0 here is the 1st photo of the adjusting tool. photo 4

Was this answer helpful?

William Jr posted an answer 16 years, 3 months ago

0 And last, here is the 2nd photo of the adjusting tool. I have also included a link for an ebay auction of the same tool. cut and paste the link into youre browser. When the page comes up, go to the top right of the page and choose the view sellers other items. This individual sells alot of these tools. Hope this helps.

Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.

Ask a Question Request a Manual