I cannot get the control to go to the heat setting

Asked by Deb on 06/11/2009 25  Answers

ManualsOnline posted an answer 15 years, 5 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
6 remove batteries for 1 min to reset control, then put batteries back in and wait 20 sec. Finally hit mode button and select heat settings. good luck and stay warm.....by the way this works for mine so i hope it works for you all. cheers
Was this answer helpful?
5 I did exactly what Michael said and my aircnditioner is on heat. A s excited Thanks Michael Chudi
Was this answer helpful?
4 Yep mines the same. It worked the other day when i turned it on for the first time, now it wont select the heat mode. Is it the controller or the system????
Was this answer helpful?
4 Please help me with the heat contoller, I cannot get him to warm up
Was this answer helpful?
4 I am having the same problem. It worked for me last year but the remote won't let me select the heat setting.
Was this answer helpful?
4 Hi, i have a TLC Model Number: TAC-12CS/G aircon and there's E2 flashing on it... does anyone know what fault this relates to because it won't switch on at all.
Was this answer helpful?
4 I bought a TCL Split Unit,it was installed by an authorized dealer and 8months a long the line the fan broke! I have been struggling for 2 MONTHS to get a response! This is not service!!!!!!! What can I do or who can I contact to get through to the TLC SUPPLIER who,apparantly has to authorize the swop??????????????????????
Was this answer helpful?
3 Having trouble getting it to work on heat - can anyone help - don't have a manual
Was this answer helpful?
0 Comments heat control I am having the same problem. It worked for me last year but the remote won't let me select the heat setting. Jan Esterhuysen maakplan@yahoo.com
Was this answer helpful?
0 I am having the same problem, I can't seem to get the 'mode' to go to heat and it's freezing! Can someone please help? stelladanser@gmail.com
Was this answer helpful?
0 I bought a TCL Split Unit,it was installed by an authorized dealer and 8months a long the line the fan broke! I have been struggling for 2 MONTHS to get a response! This is not service!!!!!!! What can I do or who can I contact to get through to the TLC SUPPLIER who,apparantly has to authorize the swop??????????????????????
Was this answer helpful?
0 Think the thermostat isn't working. Can you tell me where to find it on a TCL air-con, model TAC-30CHS/G. E 2 flashes up when con turns itself off, before reaching temperature.
Was this answer helpful?
0 Hi everybody, If you have an E2 code on the display, I suggest its time for a service man. If you are competent with electrical equipment, check the fan and Compressor capacitors. If they are within rated capacitance thencheck to see if the fans start and run, then also check the compressor current draw. If all these are within the labeled ratings, possibly the unit is out of gas. If it wont start at all, first thing is to check that you actually have electrical power at the unit, then check capacitors. if it cools but wont heat then check the reversing valve coil, maybe it is burnt out. These problems are common to all AC,s.. regards Col
Was this answer helpful?
0 Thanks so much Micheal...must remember this for next year!!
Was this answer helpful?
0 cant get the air_con on heating
Was this answer helpful?
0 Thanks to Michael. I had same problem with heating on remote control and I did exactly what Michael said. Mine is working now :D
Was this answer helpful?
0 Michael - you are an absolute legend!!! Thank you!!! Very excited!!
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.