1. Manuals
  2. Consumer Electronics Support
  3. Ozark Trail Support
  4. Tent Support
Support User Manuals
Question About Ozark Trail Tent WMC 141490
Need instructions for the tent WMC 141490...

Need instructions for the tent WMC 141490

Asked by Alison on 07/31/2014 2  Answers

ManualsOnline posted an answer 10 years, 4 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

K posted an answer 3 years, 6 months ago

0 Ozark Trail Tent WMC-141490
2 Room Cabin Tent with Screen Porch

Step 1--->  
Pin floor to ground (room only!) with stakes. (If both room and patio are staked down, Step 2 is HARD)

Step 2--->  
Build black bars in front: straight-curved-curved-straight. Light blue marks, red in middle. Put bottom ends into pin-rings! (if patio were staked down, this last step is HARD). The assembly must arc towards the back.

Step 3--->
Build black bars in middle: straigt-straigt-straight. Dark blue marks. Put bottom ends into pin-rings. The assembly must arc towards the back.

Step 4--->
Build brown bars in rear: straight-U-straight. Yellow marks. Put bottom ends into pin-rings. The assembly must arc towards the back.

Step 5-->  LIFT:
LIFT the tent by staking the patio bottom ears to the ground. Use strong stakes: they hold the tent up!!!
When lifting, hold front bars, do not pull fabric.

Step 6--->
Tighten the brown body-strips (they are at middle, outside) to mid-pole.

Step 7--->
Tighten black ears (they are at middle, outside) to mid-pole. Use the brown bands found in bag.

Step 8--->
If part of tent are sagging, take separate stakes out (but not patio ones!), pull and pin down again.

Step 9--->
Stake the down-center ear (at room entry, inside porch) with a strong stake. It needs to hold strongly.

Step 10--->
Use black-white ropes to connect/pull from back ears. Stake them into ground. Use either all 3, or only the left/right 2, or only the middle one, or none. If using the middle one, tignten to create U-shape in the top cover to act as water channel.
Was this answer helpful?

K posted an answer 3 years, 6 months ago

0 Ozark Trail Tent WMC-141490
2 Room Cabin Tent with Screen Porch

Step 1--->  
Pin floor to ground (room only!) with stakes. (If both room and patio are staked down, Step 2 is HARD)

Step 2--->  
Build black bars in front: straight-curved-curved-straight. Light blue marks, red in middle. Put bottom ends into pin-rings! (if patio were staked down, this last step is HARD). The assembly must arc towards the back.

Step 3--->
Build black bars in middle: straigt-straigt-straight. Dark blue marks. Put bottom ends into pin-rings. The assembly must arc towards the back.

Step 4--->
Build brown bars in rear: straight-U-straight. Yellow marks. Put bottom ends into pin-rings. The assembly must arc towards the back.

Step 5-->  LIFT:
LIFT the tent by staking the patio bottom ears to the ground. Use strong stakes: they hold the tent up!!!
When lifting, hold front bars, do not pull fabric.

Step 6--->
Tighten the brown body-strips (they are at middle, outside) to mid-pole.

Step 7--->
Tighten black ears (they are at middle, outside) to mid-pole. Use the brown bands found in bag.

Step 8--->
If part of tent are sagging, take separate stakes out (but not patio ones!), pull and pin down again.

Step 9--->
Stake the down-center ear (at room entry, inside porch) with a strong stake. It needs to hold strongly.

Step 10--->
Use black-white ropes to connect/pull from back ears. Stake them into ground. Use either all 3, or only the left/right 2, or only the middle one, or none. If using the middle one, tignten to create U-shape in the top cover to act as water channel.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual