1. Manuals
  2. Consumer Electronics Support
  3. Ryobi Support
  4. Cultivator Support
Support User Manuals
Question About Ryobi Cultivator 410r
Repair manual...

roughting of gas lines and attachment to primer blub

Asked by Tommy on 09/24/2008 2  Answers

ManualsOnline posted an answer 16 years, 2 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Ken posted an answer 15 years, 11 months ago

5 Route one line from the fuel filter outlet on the fuel tank to the carb inlet tube closest to the muffler (brass inlet tube has 90 degree bend). Route a second line from the carb outlet (straight brass tube on the fuel tank side of the carb) to the suction side of the fuel primer bulb. Route the third line from the discharge side of the primer bulb back through the open (return) hole in the fuel tank, ~1/2" or more into the tank. If one fuel line is bad, replace them all. The fuel filter and air filter should be replaced when replacing the fuel lines. Carb cleaning is another maintenance option, but that's a separate discussion. Ask if you need to know.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual