My DWA 157X SMEG dishwasher seems to be stuck in "END* ( on the digital display ) - all the icons flash around "END" and the lights are on, on the bottom 2 buttons on right hand side - have tried switching off - pressing buttons etc. it is only about 6 months old - any advice much appreciatede

Asked by wayne on 05/28/2012 43  Answers

ManualsOnline posted an answer 12 years, 6 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
10 I had the exact same symptom. Tried and pushed all sorts of combinations until I opened the door with the power on, pressed and held the start/stop button, lower right, and while holding the button shut the door. Presto back to life.
Was this answer helpful?
6 Many, many thanks ksawyer. Ours fritzed itself this morning and all technical support could suggest was to switch the power off at the power point and wait for 15 minutes. To no avail. :( Tried your method and "Presto!!! We have a functioning dishwasher again. :D
Was this answer helpful?
3 yep ...all fixed ,,,, the guy that came to fix it said he had never seen the problem before ....... he tried reset about 10 x (i had already tried a few times too) and was going to order another electrical board but he tried one more reset and it has been fine since
Was this answer helpful?
1 Holding the button and closing the door fixed it.... Great and thanks
Was this answer helpful?
0 My dishwasher is showing the same error message, did you have any luck fixing your dishwasher?
Was this answer helpful?
0 Thanks so much, one reset and all the buttons were active. Just started a wash cycle... So happy now don't have to do a mountain of washing up!!!
Was this answer helpful?
0 Worked well, thanks!! don't quite understand how or why but we're under way again! Terrific!!
Was this answer helpful?
0 Thank you thank thank you you are amazing we have just put the hammer down
Was this answer helpful?
0 Thanks ksawyer....I was ready to call in the fixer! So happy with all other aspects of this dishwasher. ... Some little glitch obviously but at least I can fix it Thanks to you!
Was this answer helpful?
0 Wow, I had the same problem Jan 2016 and did the holding the button and closing the door too and it fixed it also.  Thank you very much Kelvin.
Was this answer helpful?
0 Same here with my Smeg DWA 315X - and now fixed! Why the hell is Smeg not fixing this glitch when it is affecting so many of us??
Was this answer helpful?
0 Kelvin's answer worked for me. Opened the door with the power on, pressed and held the start/stop button, lower right, and while holding the button shut the door. Presto back to life
Was this answer helpful?
0 Many thanks, fixed... Finally! So helpful
Was this answer helpful?
0 I can't upvote the original answer, but that fixed it for me too. Big thanks ????
Was this answer helpful?
0 I can't upvote the original answer, but that fixed it for me too. Big thanks ????
Was this answer helpful?
0 I can't upvote the original answer, but that fixed it for me too. Big thanks ????
Was this answer helpful?
0 I can't upvote the original answer, but that fixed it for me too. Big thanks ????
Was this answer helpful?
0 I can't upvote the original answer, but that fixed it for me too. Big thanks ????
Was this answer helpful?
0 I can't upvote the original answer, but that fixed it for me too. Big thanks ????
Was this answer helpful?
0 I can't upvote the original answer, but that fixed it for me too. Big thanks ????
Was this answer helpful?
0 I can't upvote the original answer, but that fixed it for me too. Big thanks ????
Was this answer helpful?
0 I can't upvote the original answer, but that fixed it for me too. Big thanks ????
Was this answer helpful?
-1 thanks ksawyer. just tried this and fixed it in one go, thank you, thank you, thank you.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.