Searching for years in www didnt find any codes but let my share how i auto tuned my devices with this remote control from UET or Delta brand. Lets say you want to tune your Tv with this remote.... You just have have to press SET button and TV button together..the led or remote turn stable red. (means now that you have to edit the 4 digit code according to your device...and then the button TV to finish setup) Since we and i dont have the table to codes we go a step farther to auto tune... Means that we have to press once more the button SET. Now the led is blinking... So any time we press the button for power off the device...everytime we do that the internal code of the remote changes to the next one...till it finds a code that switches our device as a Tv set off. Say it happend after many presses the tv goes off...are we sure that this is the correct code? Still with led blinking on remote we press a button of numbers to switch the tv back on and check if other keys are responding right... if yes we press button SET and afterwards button Tv... our remote is ready to work with that TV set. if not ...we have to continue pressing Power button of the remote till find the right code..and tested and then save it. (if your tv goes standbye and doesnt switch back on to be scared...the code is wrong.Keep changing the code by the power button and everytime try number one for example on the remote to switch it back on... You will be suprised in how many devices you will find very similar with your TV set but not all remote buttons are working. Have patience and good luck!!! Dont forget that if you cotrol a Tv set you must have set-tv or vcr by set-vcr.You will never control a Tv with set-sat or other except set-tv. Sorry for my english..not my mother language.