10
TABLE 5 – HEATING RATING TABLE -- LOW NO
X
1
UNIT
GAS HEAT
LOW NOx HEAT EXCHANGER
TEMP RISE
(DEG F)
THERMAL
EFFICIENCY
(%)
AFUE
(%)
INPUT / OUTPUT
STAGE 1 (MBH)
INPUT / OUTPUT
STAGE 2 (MBH)
Single Phase
04
LOW --- 60 / 50 20 --- 50 81% 80%
MED --- 90 / 74 30 --- 60 81% 81%
HIGH --- --- --- --- ---
05
LOW --- 60 / 50 20 --- 50 81% 80%
MED --- 90 / 74 30 --- 60 81% 81%
HIGH --- 120 / 101 40 --- 70 81% 80%
06
LOW --- 60 / 50 15 --- 50 81% 80%
MED --- 90 / 74 25 --- 60 80% 81%
HIGH --- 120 / 101 35 --- 70 80% 81%
Three Phase
04
LOW --- 60 / 50 20 --- 50 81% 80%
MED --- 90 / 74 30 --- 60 81% 81%
HIGH --- --- --- --- ---
05
LOW --- 60 / 50 20 --- 50 81% 80%
MED --- 90 / 74 30 --- 60 81% 81%
HIGH --- 120 / 101 40 --- 70 81% 80%
06
LOW --- 60 / 50 15 --- 50 81% 80%
MED --- 90 / 74 25 --- 60 80% 81%
HIGH --- 120 / 101 35 --- 70 80% 81%
NOTE:
1. Units meet California’s South Coast Air Quality Management District (SCAQMD) Low---NO
x
emissions requirement of 40
nanograms per joule or less.
TABLE 6 – SOUND PERFORMANCE TABLE
UNIT
COOLING
STAGES
OUTDOOR SOUND (dB) AT 60
A --- WE IGH TE D 63 125 250 500 1000 2000 4000 8000
04A 1 76 78.2 78.0 74.2 73.3 70.6 66.0 62.4 56.9
05A 1 78 84.7 83.6 77.1 74.6 72.3 68.3 64.7 60.9
06A 1 77 87.5 82.5 76.1 73.6 71.3 67.1 64.1 60.0
07A 1 82 90.1 82.6 81.0 79.4 77.0 73.0 70.4 66.7
08D 2 82 90.6 84.3 80.2 79.3 77.1 72.2 67.4 63.7
09D 2 82 88.6 85.0 81.6 79.5 77.4 74.1 71.0 66.3
LEGEND
dB --- Decibel
Use of the AHRI Certified
TM Mark indicates a
manufacturer’s
participation in the
program For verification
of certification for individual
products, go to
www.ahridirectory.org.
NOTES:
1. Outdoor sound data is measure in accordance with
AHRI.
2. Measurements are expressed in t erms of sound power.
Do not compare these values to s ound pressure values
because sound pressure depends on specific environ-
mental factors which normally do not match individual
applications. Sound power values are independent of
the environment and therefore more accurate.
3. A---weighted sound ratings filter out very high and very
low frequencies, to better approximate the response of
“average” human ear. A---weighted measurements for
Bryant units are taken in ac cordance with AHRI.
581J
