Power and connection messages
The following is a list of power- and connection-related error messages:
•
Communication test failed
•
HP All-in-One not found
•
Improper shutdown
•
Two-way communication lost
Communication test failed
Cause: The HP All-in-One is turned off.
Solution: Look at the display on the HP All-in-One. If the display is blank and the
Power button is not lit, the HP All-in-One is turned off. Make sure the power cord is
firmly connected to the HP All-in-One and plugged into a power outlet. Press the
Power button to turn on the HP All-in-One.
Cause: The HP All-in-One is not connected to the computer.
Solution: If the HP All-in-One is not properly connected to the computer,
communication errors can occur. Make sure the USB cable is securely connected to
the HP All-in-One and the computer, as shown below.
HP All-in-One not found
Cause: The USB cable is not plugged in properly.
Chapter 11
258 Troubleshooting
