104 VQT2R48 VQT2R48 105
For [REC] menu setting procedures (→20)
Using the [REC] menu (Continued)
[PICT.ADJ.]
The elements that determine picture quality are set for each item and the pictures you
record are adjusted to your preferred picture quality.
■
Recording Mode:
■
Settings:
Settings content Settings and effect – +
[CONTRAST]
The difference in
brightness and
darkness in pictures
Smaller Greater
[SHARPNESS] Outlines in pictures Soft Sharp
[SATURATION]
Change of colour
saturation
Subdued Vivid
[NOISE REDUCTION] Noise processing Prioritize resolution Reduce noise
●
If you are concerned about noise when you record a dark scene, it is recommended
to move [NOISE REDUCTION] to the plus side, or to adjust items other than [NOISE
REDUCTION] to the minus side before recording.
[STABILIZER]
Automatically detects and prevents jitter.
■
Recording Mode:
■
Settings:
Settings Effect
[OFF] Pictures deliberately taken with no jitter correction
[AUTO]
The optimum image stabilizer is performed automatically based on the
recording conditions.
[MODE 1]
Constant correction
(Monitor image stable, composition easy to determine)
[MODE 2]
Correction when shutter button is pressed
(More effective than [MODE 1])
●
Setting fixed to [MODE 2] in [SELF PORTRAIT] and [OFF] in [STARRY SKY] Scene
Modes.
●
Cases where Optical Image Stabilizer may be ineffective:
Heavy jitter, high zoom ratio (including Digital Zoom range), fast-moving objects,
indoors or in dark locations (due to low shutter speed)
●
This is fixed at [MODE 1] during motion picture recording.
[DIGITAL ZOOM]
Multiplies effect of Optical Zoom or Extra Optical Zoom by up to 4 times. For details (→43)
■
Recording Mode:
■
Settings: [OFF]/[ON]
●
This is fixed to [ON] when [MACRO ZOOM] is set.
[CONTINUOUS AF]
Either allow the focus to be constantly adjusted during motion picture recording, or fix the
focus position at the start of recording.
■
Recording Mode:
■
Settings: [ON] : Adjust focus according to movement of subject during motion picture
recording. ( appears on the screen.)
[OFF] : Fix focus position at the start of motion picture recording.
Use this setting to keep the same focus position for subjects with
little forward/backward movement.
●
The setting is fixed to [OFF] in [STARRY SKY] and [FIREWORKS] Scene Modes.
[COLOR EFFECT]
Set colour effects.
■
Recording Mode:
■
Settings: [STANDARD]/[B/W]/[SEPIA]/[COOL] (more blue)/[WARM] (more red)/
[Happy] (
only)
●
In ([INTELLIGENT AUTO]), only [STANDARD], [Happy], [B/W] or [SEPIA] can be set
(these are set separately from other modes).
