13
Once you have installed the NJ205 hardware, you need to
configure it for use on your particular network. To configure the
NJ205, install the Local and Central Configuration Managers.
NOTE: You will use the Local Configuration
Manager for initial configuration of the NJ205
on your network. It is usually easiest if you load
this software on a laptop and use it to configure
NJ205 devices as you install them.
The NJ205 Central Configuration Manager is
used for advanced configuration and
management of one or more NJ205 devices on
your network. This software should be installed
on the machine you plan to use to manage your
NJ205 devices from a remote location—perhaps
the same console you use for SNMP
management.
3
Installing the
Configuration Managers
