Accessing the Embedded Web Server
To access the Embedded Web Server, follow these 4 steps:
1 Open a standard Web-browsing application such as Microsoft™ Internet Explorer™
(Version 6.0 and higher) or Netscape™ Navigator™ (Version 7.2 and higher).
2 In the URL field, specify the IP address of the gateway (for example, http://10.1.10.10 for
the first module of the V7122 gateway); the Embedded Web Servers Enter Network
Password screen appears, shown in
Figure 12.
Figure 12 Embedded Web Server Login Screen
3 Enter the username (default:
Admin
), and password (default:
Admin
). Note that the User
Name and Password fields are case-sensitive.
4 Click OK; the Quick Setup screen is accessed, shown in
Figure 13 (H.323), and Figure
14 (SIP).
Configuring the V7122 Gateway Basic Control Protocol Parameters
To configure the V7122 gateway basic control protocol parameters use the Embedded Web
Servers Quick Setup screen.
For H.323, see Configuring Basic H.323 Parameters
.
For SIP, see Configuring Basic SIP Parameters
.
When you have completed the above relevant section you are then ready to start using the
V7122 gateway. For information on how to fully configure the VoIP gateway, see the V7122
Digital Gateway User Guide.
28
V7122 Digital Gateway Installation Guide
