A SERVICE OF

logo

Chapter 1 – System Housing 1-9
1.5.2 5.25-inch Drives
You may install a CD-ROM, digital audio tape (DAT), hard disk, diskette drive or
any other 5.25-inch device into the drive bay.
To install 5.25-inch devices:
1. Open the front panel. See section 1.4 for more information on opening the
housing panel.
2. Detach the 5.25-inch drive frame (2 pieces) from the housing by removing two
screws. Keep the screws for later use.
3. Attach the drive frames to the 5.25-inch drive securing it with four screws as
shown below.