Connecting the Box
Please follow the instruction here to place the AV box:
To attach the AV box to the unit
Figure 28 Bottom View of AV box
Figure 29 Side View of AV box
1. Precisely place the two chocks at the
lower surface of the AV box into the
lower slots in the correspondent
position in the projector.
2. Slowly push the box to fit the unit
and, meanwhile, insert the box plug
into the A/V connector closely.
3. Plug in the correct cord into the
correspondent jack or port to perform
A/V function.
4. Select inputs by pressing “Source” key, and select channel by the
channel up or down keys.
Figure30 Connecting the Box
English 29
