User Guide for AIR-104/AIR-204 5-8
Step 3 To add an entry to the DHCP Static Assignment Table, click on the
Add
button at the bottom of the table. The
Add a Static Entry
screen
appears in the main window of the ICC browser screen.
Step 4
Enter the following information to create a static DHCP entry:
Name:
Enter a name for your reference.
IP Address:
The IP address to be consistently assigned to this device.
MAC Address:
The hardware address associated with the Ethernet adapter
of the network device. Please note that dashes must separate each pair of
hexadecimal digits.
Step 5 When you are finished, click on the
Apply
button. The
DHCP Static Assign-
ment Table
will appear again in the main window of the ICC browser screen.
Step 6 Repeat
steps 3-5
to assign further static DHCP entries. You may also select
an existing static DHCP entry by clicking it with the mouse; then click on the
Edit
button to edit the selected entry, or click on
Delete
to delete it.
Chapter 5 Advanced Configuration
