Acer PH530 Manual

A SERVICE OF

next previous

11

... English

Introduction

Power

Powering On the Projector

1. Removethelenscap.

2. Ensurethatthepowercordandsignalcablearesecurely

connected.ThePowerLEDwillash

red

.

3. Turn on the lamp by pressing “Power” button on the control

panel



andthePowerLEDwillturn

solid red

.

4. Turnonyoursource(computer,notebook,videoplayer

,etc.).Theprojectorwilldetectyoursourceautomatically.



If the screen displays "Lock" & "Source" icons, it means the pro-

jector locks on this source type and there is no such type of input

signal found



If the screen displays “No Signal”, please make sure the signal

cables are securely connected.



If you connect multiple sources at the same time, using the

“Source” button on the remote control or control panel to switch.

Powering On/Off the Projector



Turn on the pro

-

jectorrstandthen

the signal sources.

1

MENU

Power

Source

Resync

Temp

Lemp