Page 4
Notes on the Blood Pressure Recorder
Storage
❏ Do not store the recorder in the following places.
Excessive moisture
Excessive heat
Direct sun light
Excessive vibration
Exposure to dust
Exposure to corrosive chemicals
Magnetic fields
Before use
❏ Cover the RS-232C terminal using the rubber cap, to avoid dust.
❏ Confirm that the recorder works correctly.
❏ Confirm that the cuff and air hose are connected properly.
❏ Cuffs should be clean prior to use with patient.
❏ Clear the old data before starting a new measurement.
❏ Avoid strong magnetic field and static electricity.
❏ Do not use this recorder near a high frequency surgical equipment.
During use
❏ The recorder should be operated by a medical professional who knows it well.
❏ Stop using the recorder if the patient feels pain in the arm or if the recorder
does not measure properly.
❏ If the recorder is exposed to excessive moisture, do not use. Immediately
request service from vendor.
After use
❏ Clean the recorder, cuff and accessories for the next use. Do not pull or kink
hoses. Do not use organic solvent, antiseptic solution, etc.
❏ Turn off the power switch.
❏ Please use the original box for transportation of the monitor.
Periodic maintenance
❏ The recorder is a precision instrument. Please check all functions (every year)
periodically. Contact your nearest A&D office for this inspection.
Environmental protection
❏ If you disuse the recorder, remove Ni-Cd battery and built-in Li battery from
this recorder.
Ni-Cd
❏ Disuse Ni-Cd battery to its exclusive trash can because of recycling it.
❏ Dispose of Li ion battery in the recorder as dangerous object properly.
Notes on the Blood Pressure Recorder Before use
