6
Note: Please carry out a memory initialization (Reset, see page
27 ) after band plan was changed.
Feature Highlights
Chain Search - lets you enter personal search bands in 10
locations and search all locations in a chain of frequency bands.
Triple-Conversion Circuitry - virtually eliminates any
interference from IF (intermediate frequency) images, so you
hear only the selected frequency.
Channel-Storage Banks - the scanner has 10 banks. You can
store up to 20 frequencies into each bank (for a total of 200
frequencies), so you can more easily identify calls.
Two-Second Scan Delay - delays scanning for about 2
seconds before moving to another channel, so you can hear
more replies that are made on the same channel.
Lock-Out Function - lets you set your scanner to skip over
specified channels or frequencies when scanning or searching.
Priority Channels - lets you program one channel in each bank
(10 in all) and then have the scanner check that channel every 2
seconds while it scans the bank, so you do not miss
transmissions on those channels.
Two Service Banks - frequencies are preset in separate aircraft
and FM CB, to make it easy to locate specific types of calls.
Key Lock - lets you lock the scanner's keys to help prevent
accidental changes to the scanner's programming.
Direct Access - lets you directly access any channel.
Display Backlight - makes the scanner easy to read in low-light
situations.
Flexible Antenna with BNC Connector – provides adequate
reception in strong signal areas and is designed to help prevent
antenna breakage. Or, you can connect an external antenna for
better reception.
Memory Backup - keeps the frequencies stored in memory for
an extended time if the scanner loses power.
Two Power Options - let you power the scanner using internal
batteries or external AC power using the included AC adapter.
Key Confirmation Tones - the scanner sounds a tone when
you perform an operation correctly, and an error tone if you
make an error.
Battery Low Alert - warns you when battery power gets low.
