100-EN
Convenient Functions
6 Use Joystick to select “L/R” or “L+R”,
and press ENTER.
L/R: Independent adjustment values can be
set to the Left and Right channels.
L+R: The same adjustment values are set to
the Left and Right channels.
When “L+R” have been selected, use Joystick
to select L or R, and press ENTER.
L: Validates the current setting of the Left
channel, setting the same adjustment value
to the Left and Right channels.
R: Validates the current setting of the Right
channel, setting the same adjustment value
to the Left and Right channels.
7 Use Joystick to select the desired channel,
and press ENTER.
The selectable channels will differ depending on
the system settings (Page 9).
8 Use Joystick to select the frequency,
then press
or and adjust the level.
Adjustable Frequencies
Front/Rear/Center: 20 Hz to 20 kHz
(1/3 octave intervals)
Sub Woofer: 20 Hz to 160 Hz
(1/3 octave intervals)
Level
±9 dB in 0.5 dB steps
G
R
A
P
H
I
C E Q
L / R L
+
R
select
L / R
FRONT L
REAR L
REAR R
FRONT R
FRONT C
G
R
A
P
H
I
C E Q
L / R L
+
R
select
L / R
FRONT L
REAR L
REAR R
FRONT R
FRONT C
G
R
A
P
H
I
C E Q
L/R FRONT R 31.5Hz 2. 5 dB
GRAPHIC EQ adjustment
Equalizer adjustment (when DVI-9990/TMI-M990 is connected) (continued)
