A SERVICE OF

logo

Open as PDF
next previous
12. PITCH BEND
This function will
momentarily
increase or decrease a tracks playback speed using the
(-) & (+) PITCH BUT-
TONS (21 & 22)
.
The maximum pitch bend percentage allowed is +/-16%. The pitch bend function will work
in conjunction with the
PITCH SLIDER (24)
pitch setting. For example, if the
PITCH SLIDER (24)
is set to a 2%
pitch gain the pitch bending process will begin at 2% and wi
ll continue to the maximum of -
/+16%.
PITCH BEND BUTTONS (21 & 22)
The
(+) PITCH BEND BUTTON
(22)
will provide a speed bump and the
(-) PITCH BEND BUTTON (21)
will pro-
vide a slow down. The extent to which the speed changes is proportionate to the amount of time the button
is pressed. For example, if the
(+) PITCH BEND BUTTON (22)
is held down continuously, the disc speed will
increases and will continue to increase until it reaches a maximum of 12% speed gain. When you release the
(+) PITCH BEND BUTTON (22)
the disc speed will automati
c
ally return to
it’s previous speed.
Holding down or tapping on the
(+) PITCH
BEND BUTTON
(22)
will provide a speed
bump in the playback pitch.
Holding down or tapping on the
(-) PITCH BEND
BUTTON
(21)
will provide a slow down in the
playback pitch.
Figure 15
Figure 16
JOG WHEEL (13)
The
JOG WHEEL (13)
will temporarily bend the pitch if a track
is in play mode. Turing the wheel in a clockwise direction will
increase your track pitch and turning the wheel in a counter-
clockwise direction will slow your track pitch. The speed you
rotate the
JOG WHEEL (13)
will determine pitch bend per-
centage, to a maximum of +/-16%.
Figure 17
BASIC OPERATION
©
American Audio
®
- www.americandj.com - SCD-100™ Instruction Manual Page 17
TRACK M S F
COMPACT
DIGITAL
AUDIO
1 BIT 8 TIMES OVERSAMPLING D/A CONVERTER COMPACT DISC PLAYER
ON
OFF
TRACK M S F
COMPACT
DIGITAL
AUDIO
1 BIT 8 TIMES OVERSAMPLING D/A CONVERTER COMPACT DISC PLAYER
ON
OFF
TRACK M S F
COMPACT
DIGITAL
AUDIO
1 BIT 8 TIMES OVERSAMPLING D/A CONVERTER COMPACT DISC PLAYER
ON
OFF