14
10. Weekend Events – Use this feature to set the number of events for the
weekend program. The default value is 4 events (The E
NERGYSTAR
®
setting), which will result in the “LEAVE” and “RETURN” events to be
used during programmed operation. If the owners schedule is such that
the home or building is generally occupied during the weekends, switch
to 2 events on the weekend. This will cause the “LEAVE” and “RETURN”
events to be ignored during programmed operation. Press the ADJUST –
Up or ADJUST – Down buttons to toggle between the two selections and
press the LIGHT button when done. “DONE” will appear on the display
and the thermostat will reset.
Step 10. Set the current time and day of the week
(MODELS 8363, 8365 & 8366 ONLY)
Press the CURRENT TIME button to access the clock. Use the ADJUST – Up
and ADJUST – Down buttons to set the correct hour value. Make sure the
correct AM/PM designator shows.
Press the CURRENT TIME button to enter the hours value and access the
minutes value. Use the ADJUST – Up and ADJUST – Down buttons to set
the correct value.
