A SERVICE OF

logo

9
English
Access Point mode
a: Using a network cable, connect the
access point and WL-330N.
Repeater and Hotspot modes
Simply power on WL-330N using its power adapter or its micro USB power cord.
A network cable is not needed.
Wireless Network Adapter mode
a: Connect the micro USB power cord
to the Ethernet-enabled device
such as an Internet TV.
b: Use a network cable to connect
the Ethernet-enabled device and
WL-330N.
ANT ANTResetPowerOn/OffUSB LAN4 LAN3 LAN2LAN1 WPS
On Off
ADSL
a
a
b
NOTE: For more details on using the micro USB cord to power WL-
330N, refer to step 2 of the Getting started section.
NOTE: For more details on the operation modes, refer to the
Operation Modes section.