Using and Programming Features
■
the number of unlabeled line buttons.
If all the line
buttons have lines assigned to them, you can use features
only by dialing feature codes or selecting them from the
display. If there are unlabeled line buttons, you can
program features onto them. You can then use the feature
by pressing one button instead of dialing a feature code.
■
whether the feature needs a programmed line button.
Some features, such as Do Not Disturb, cannot be used
from the display or with feature codes. You need to
program a button to turn the feature on and off. The light
next to the button provides a visual reminder when the
feature is in use. The following features require
programmed buttons. Programming codes are in
Appendix C.
Auto Dial
Coverage
Coverage Off
— Primary Individual Coverage
— Secondary Individual Coverage
— Group Coverage
Do Not Disturb
Headset/Handset
Mute
Saved Number Dial
Signaling and Notify
3-2 Using and Programming Features
