20 Troubleshooting
Problem Possible Solution
Signal strength
indicator is
blinking Green
• The Wireless Home Phone Base is
connected to a 3G MicroCell, and is
operating properly.
Red signal
strength
indicator
• Make sure the external antenna is installed
and securely fastened.
• Move your device to another area of the
home with a strong wireless signal.
Flashing Red
signal strength
indicator
• SIM is missing or not installed properly.
1) Remove the battery cover and back-up
battery.
2) Locate the SIM card slot and insert
the SIM card into the slot until secure.
The SIM card will click and lock in place
when properly installed in the correct
orientation.
• SIM card may be invalid or damaged and
need to be replaced.
Can’t connect
to my 3G
MicroCell
(signal strength
indicator is not
flashing Green)
• Add the phone number associated with
your Wireless Home Phone Base to your 3G
MicroCell Approved User List.
• Power cycle your 3G MicroCell as well as your
Wireless Home Phone Base.
• Make sure the Wireless Home Phone Base is
within range of the 3G MicroCell.
SIM Card
doesn’t work
in my mobile
device
•
The SIM card provided with your Wireless
Home Phone Base is intended for use only in
your specific Wireless Home Phone Base and
can not be used in a mobile handset.
