Getting Started Installing Computer Software
19
3.3.1 Printing Operation
This section describes how to receive file from the MaxiSys tablet and perform
printing through the computer:
To perform printing through the computer
1. Install the PC Link (Printing Services program) to the computer.
2. Make sure the display tablet is connected to the computer network,
either via Wi-Fi or LAN, before printing. See 7.1.3 Printing Setting on
page 77 for more information.
3. Run the Printing Services program on the computer.
4. Tap the Print button on the toolbar displayed in various applications
of the MaxiSys system.
5. Select the appropriate printer. A temporary file will be created and
sent to the computer for printing.
6. Click the Printer Server tab on the top of the program interface on
the computer, and wait for the printing file to load.
7. Click the Print button to start printing.
NOTE: Make sure the computer installed with the Printing Services program is
connected to a printer.
Refer to the accompanied user manual for the corresponding VCI device for
detailed information about the operation of the network configuration program
and/or the update agent.
