A SERVICE OF

logo

44
Alternate Setup Method
4544
Setting your Connection Type to Modem Only (Disable Internet Sharing)
In this mode, the Router simply acts as a bridge passing packets across the
DSL port. It requires additional software to be installed on your computers
in order to access the Internet.
1. VPI/VCI – Enter your VPI and VCI parameter here. These
identifiers are assigned by your ISP.
2. Encapsulation – Select the LLC or VC MUX that your
ISP uses.
Click “Apply Changes” to save and activate your settings. To go back to
the original settings before saving, click “Clear Changes”; or click any of the
quick-navigation links for other options. Your new settings will not be saved
unless you click “Apply Changes”.
(1)
(2)