A SERVICE OF

logo

724-746-5500 | blackbox.com
Page 11
RM610A-R2
Chapter 4: Operation
4. Operation
4.1 Operating the Door
The Server Side-Mount Wall Cabinet Enclosure is supplied with two locks (one for the front door and one to lock the middle sec-
tion to the rear section). The middle section and rear section incorporate a grabber catch that enables the middle section to be
held shut without locking.
4.2 Removing or Installing a Door
Open the door beyond 90°, remove the top half of the upper hinge, then grasp the door with both hands and carefully lift it
upward. When the door is free of two hinge pins, pull the door away from the enclosure. To attach the door, align both door
hinges to their respective hinge pins on the enclosure and slowly slide the door down until seated.
4.3 Removing the Front Panel
To remove the front panel, unlock it and then slowly lift it upward.