• Study, understand, and follow all instructions
provided with and on this device before operating
this device.
• Do not exceed rated capacity.
• This is a lifting device only.
• After lifting, immediately transfer the load to appro-
priately rated vehicle stands.
• Never work on, under, or around a load supported by
this device.
• Use only on hard, level surfaces capable of sustain-
ing rated capacity loads.
• Do not move or dolly loads with this device.
• Do not modify this device.
• Do not use adapters or accessories that are not
provided initially.
• Lift only on areas of the vehicle as specified by the
vehicle manufacturer.
• Failure to heed these markings may result in
personal injury and/or property damage.
• Leer, comprender, y seguir las instrucciónes antes
de utilizar el aparato.
• El manual de instrucciónes y la información de
seguridad deben estar comunicado en lengua del
operador antes del uso.
• No seguir estas indicaciónes puede causar daños
personales o materiales.
4
! WARNING ! ADVERTENCIA
Figure 1 - Model BH6010 Components
handle position lock
release valve
(handle knob)
saddle
foot pedal
oil filler plug
(on reservoir)
handle
Figure 2 - Model BH6011 Components
saddle
lift control
valve
handle
sleeve
oil filler plug
(on reservoir)
release valve
(handle knob)
handle
handle position lock
ASSEMBLY
Little, if any, assembly is required of these jacks. Always secure the handle into the handle sleeve by means of the bolt
and lock washer provided. Tighten securely to prevent accidental removal of handle while in use. Familiarize yourself
with the illustrations in the operator's manual. Know your jack and how it operates before attempting to use.
To avoid crushing and related injuries:
NEVER work on, under or around a load supported
only by a jack. ALWAYS use adequately rated jack
stands. Immediately tranfer the load to appropriate
jacks stands.
! WARNING
