Brother BAS-311E Manual

A SERVICE OF

next previous

41

BAS-311E.311EL.326E.326EL

Chapter 3. Assembly

8. Presser foot mechanism

1. Insert the presser bar w into the presser bar bush q. Pass the presser bar lifter e, the cushion r, and the needle bar

clamp t through the presser bar w in that order.

2. Secure the needle bar clamp t with the screw.

3. Insert the spring y and the spring guide u from the top of the arm, pass the spring guide u through the washer i and

the presser bar w, and attach the presser adjusting screw o.

Note: Position the presser adjusting screw o using the presser adjusting nut !0 so that there is approx. 32 mm from the

top of the presser adjusting screw o to the top of the machine.

4. Pass stepping work clamp arm F !1 through spreader shaft bushes (L) and (R) !2, then insert it into stepping work clamp

arm R !3.

5. Attach the stepping link assy !6 to the arm using the shoulder screw !5, and to the presser bar lifter e using the

retaining ring !7.

t

r

i

w

e

!6

!4

!5

!7

u

q

y

o

!1

!2

!0

!3

32mm