Buffalo Technology P4LWAG Manual

A SERVICE OF

next previous

7

4-PlugtheBuffaloACadapterintoanACpoweroutlet.BuffalorecommendsconnectingtheAC

adapter to a power-strip with a surge protector to protect it from power surges caused by lightning.

5 - Plug the power connector from the AC adapter into the back of the LinkTheater.

The‘POWER/STANDBY’lightonthefrontoftheLinkTheaterwillturnorange,thengreen.Youdo

not need to press the power button on the front of the LinkTheater. If it does not light up, then please

check that the proper AC adapter is plugged in and seated correctly. Also, check that your power-

strip or surge protector is on.

6-Oncethe‘POWER/STANDY’lightonthefrontoftheLinkTheaterturnsgreen,thedevicehas

properly powered up and is ready for use. At this point, please turn on your TV or monitor. Change

yourTVormonitor’ssourcesettingtocorrespondtotheinputthatyoupluggedtheLinkTheaterinto.

OncetheLinkTheater’sbluemenuappears,yourLinkTheater’svideoisproperlyconnected.