A SERVICE OF

logo

Open as PDF
next previous
7
IfyouhaveaWindows98/ME/2000/XPmachinewithaCD-ROMdriveavailableonyour
computernetwork,theEthernetConverterManagermakesitsimpletocongurethe
EthernetConverter.ThefollowingstepswillguideyouthroughconguringtheEthernet
Converter via the Ethernet Converter Manager.
ConnectoneoftheEthernetConverter'sLANportstoanopenportonyournetwork's
router,switchorhubwiththeincludednetworkpatchcable.Iftherearenoports
available, you can temporarily remove a computer or other connected device and plug
the Ethernet Converter to that port. You can plug the Ethernet Converter directly to the
conguringcomputer,butwillhavetoconguresettingsmanuallyasdescribedonpage
17.
Oncethenetworkcablehasbeenpluggedin,plugtheEthernetConverter'sACAdapter
intoanavailablepoweroutlet.Thenattachthepowerconnectortothebackofthe
EthernetConverter.Thebootupprocesstakes30secondsandiscompletewhenboth
theWirelessandEthernetLEDsarelit.
ReturntothePCdesignatedforcongurationandinserttheincludedEthernetConverter
CD-ROMintothePC'sCD-ROMdrive.
TheEthernetConverterUtilityshouldlaunchautomatically.Ifitdoesnot,browseyour
CD-ROMdriveinWindowsandrunthesetup.exe program.
Configuration with Ethernet Converter Manager