A SERVICE OF

logo

Open as PDF
next previous
Making Prints Using the Stack Bypass
2-45
2
Basic Operations
3
Load the paper into the stack bypass.
Make sure that the height of the paper stack does not exceed the loading limit
mark ( ).
When you use the stack bypass to make copies, straighten out curled papers
prior to use, as shown below. Curled paper may cause a paper jam.
To print on the back side of preprinted paper, load the blank side of the
preprinted paper face up into the stack bypass, as shown in the illustration
below.
IMPORTANT
When loading paper into the stack bypass, align the paper stack neatly between
the slide guides. If the paper is not loaded correctly, a paper jam may occur.
Feeding Direction
Output
Direction
After the first one-sided
copy is made
When copying on the back
side of a preprinted sheet.
Feeding
Direction