82
Setting the White Balance (continued)
• Some settings are not available with certain Shooting modes. Please refer to
Functions Available in Each Shooting Mode (p. 180)
• To set and use a custom white balance setting, it is advisable to select the
Shooting mode and set the exposure compensation and flash exposure
compensation to zero (±0). The correct white balance may not be obtained when
the exposure is incorrect (image is completely black or white).
• It is also advisable to use the LCD monitor to compose the shot and to zoom in to
the maximum telephoto setting.
• Since the white balance data cannot be read in
mode, preset the white
balance in another Shooting mode first before selecting
mode.
• Set the flash on or off when setting a custom white balance.
The white balance may not be accurate if the setting conditions and shooting
conditions are not the same.
If the flash fires when setting a custom white balance with the flash set to
or
, ensure that you also use the flash when you go to shoot.
• The custom white balance setting is not cancelled even if settings are reset to
default settings (p. 157)
6
Shoot the image.
