44
4. Click [Get Photo] from the icons that display and select [Cameras].
5. Click the [1 Camera] tab.
In the [Camera Models] option, confirm that [Canon XXX USB] (XXX will be replaced
by your camera model name) or [Canon Digital Camera RS-232C] is selected. If
several models are listed, select the one that corresponds to your camera.
6. Click the [Open Camera] button.
The TWAIN driver will start. Use it to load images. (➜ p. 46)
Connecting the Camera to a Serial Interface
1. Attach the camera to the computer with the serial cable.
Refer to Where to Find Instructions for Attaching Your Camera to a
Computer (➜ p. ii) for connection instructions.
2. Set the camera to the mode for communicating with a computer.
3. Start Adobe PhotoDeluxe Home Edition.
4. Click [Get & Fix Photo] at the upper left of the window.
5. Click [Get Photo] from the icons that display and select [Cameras].
6. Click the [1 Camera] tab.
In the [Camera Models] option, confirm that [Canon Digital Camera RS-232C] is
selected.
7. Click the [Open Camera] button.
The TWAIN driver will start.
8. Click the [Communication Settings] button.
9. Set the port type, port name and baud rate (transfer speed) settings
and click the [OK] button.
For instructions on the communication settings, please refer to page 102.
For downloading instructions, please see Loading Images (➜ p. 47).
