101
You can automatically correct red-eye that occurs in images taken with the
flash.
Choose [Flash Settings].
● Press the n button, choose [Flash
Settings] from the 4 tab and press the
m button.
Adjust the setting.
● Press the op buttons or turn the Ê dial
to choose [Red-Eye Corr.] and press the
qr buttons to choose [On].
XΠwill appear on the screen.
Red-eye correction may be applied to red areas other than red eyes. For
example, when red make-up has been used around eyes.
• Not available when shooting in .
• You can correct recorded images (p. 139).
• You can also display the screen in Step 2 by pressing the n button
while the screen in Step 2 on p. 61 is displayed.
EC272_CUG-E_CDI-E409.book Page 101 Thursday, August 27, 2009 3:06 PM
