111
Shooting – Selecting Particular Effects
3
Press the T arrow on the omni
selector, then select the number
of shots using the W or X arrow
on the omni selector.
z If you press the omni selector
continuously, the number of shots
increases in units of 5 shots at a time.
z The maximum number of shots* is
determined according to the CF card’s
remaining capacity.
* The maximum number of shots may
decrease according to the images shot.
4
Press the SET button
z appears on the LCD monitor (or in the viewfinder) and
appears on the display panel.
5
Press the shutter button.
z The first image is shot and the interval shooting session starts.
z Once the set number of shots is taken, the camera automatically
powers down regardless of the power saving function settings.
z If the below operations are accessed while the interval shooting is
in process, the interval shooting session will be canceled.
• Turning the mode dial or pressing the shutter button halfway
while the camera is waiting to shoot the next image
• Opening the CF card/battery cover
• Switching to Playback mode
• Turning off the power
z Once the interval shooting session is started, all operation
buttons become inactive.
z The lens stays extended until the next image is shot.
z Images are not displayed on the LCD monitor (or in the
viewfinder) right after being shot.
z Interval shooting is not available when the date and time are not
set.
z Super Macro mode, Continuous Shooting (normal, high-speed)
and Self-timer are not available.
z The AEB mode and the Focus-BKT mode settings cannot be set.
