49
3 Setting the Time Code
Time code
You can append the time code to a movie that was output from
HDMI. This is convenient for proxy editing after the movie output
from HDMI is recorded to an external recording device (p.54).
[On]: Time code is appended to the HDMI output image.
[Off]: Time code is not appended to the HDMI output image.
Recording command
When you record a movie that is output from HDMI to an external
recording device, you can synchronize the camera’s movie shooting
start/stop with the external recording device’s recording operation.
[On]: Synchronize external recording device’s recording start/stop
with camera’s movie shooting start/stop.
[Off]: Control external device’s recording start/stop from external
recording device.
HDMI
If the movie-recording quality’s frame rate (p.54) and HDMI output frame
rate are set manually to NTSC (60/30 fps) and PAL (50/25 fps) frame rates
in a combination that does not function properly, the time code will not be
appended to the HDMI output image.
For information on external recording devices compatible with [Rec
Command], refer to Canon Web site, etc.
