101
Shooting with a Flash
7
Set the flash exposure compensation
amount.
•
Turn the < > switch to < >, then turn the < >
dial to set the desired flash exposure compensation
amount at the viewfinder or LCD panel.
•
“ ” indicates increased flash exposure, and “ ”
indicates decreased flash exposure.
•
To cancel the flash exposure compensation, set the
flash exposure compensation amount to < >.
Using the Built-in Flash
Decreased
flash
exposure
•
The flash exposure compensation amount will remain in effect even after you turn the
<
> switch to < >.
•
In step 2, turning the < > dial sets the metering mode. (→p.74)
•
With C.Fn-06-1, you can set the camera to adjust exposure compensation in 1/3-stop
increments. (→p.147)
•
With C.Fn-14-1, you can also disable the Auto reduction of fill flash function.
(→p.150)
Flash Exposure Compensation
Flash exposure compensation can be set in the same way as with exposure compensation. It
can be set up to
+
/
–
2 stops in 1/2-stop increments. Flash exposure compensation works in
Creative Zone modes.
Press the < > button. ( )
1
2
Increased
flash
exposure
Decreased exposure
Increased exposure
Shoot.
3
Standard flash
exposure index
Flash exposure level mark
