Using Camera Access Point Mode to Establish a Connection
36
Set [SSID], [Channel setting], and [Encryption settings] on each
screen displayed.
1
Enter an SSID.
Enter any character using the virtual
keyboard (p.14).
When you are finished, press the
<M> button.
2
Select [Auto setting].
Select [Auto setting] and press
<0>.
Select [OK] and press <0> to go to
the next screen.
To select manually, select [Manual
setting] and turn the <6> dial.
3
Select [None].
Select [None] and press <0>.
Select [OK] and press <0>. The
screen shown in step 5 on page 34
will appear.
For encryption, select [AES], then
enter any encryption key using the
virtual keyboard (p.14).
When [Manual connection] Is Selected
