The Device settings screen is displayed.
4.
Select PictBridge print settings, then press the
OK button.
The PictBridge print settings screen is displayed.
5.
Select DVD/CD print setting, then press the
OK button.
The screen to change the print area is displayed.
6.
Use the button to select Outer circle or Inner circle and use the
button to
change the print area.
7.
Press the
OK button.
Note
Measure the outer and inner diameters of the printing surface of the printable DVD/CD
and make sure you set a value smaller than the measured value for the outer diameter,
and a value larger than the measured value for the inner diameter.
For information on printable discs, contact their manufacturers.
8.
Use the
button to select Recommended DVD/CD or Other DVD/CD, then press the
OK
button.
Note
If your medium is the recommended DVD or CD, specify Recommended DVD/CD for the
suitable density printing. If not, specify Other DVD/CD.
Page top
Page 710 of 988 pagesPrinting from a PictBridge Compliant Device
