26 Chapter 1
Before Printing
z Loading Envelopes
Use either European DL or US Comm. Env. #10 size envelopes.
The address is rotated automatically to match the direction of the envelope when printing.
1 Load the envelope against the Cover Guide on the right side of the Paper Support
with the print side facing UP, and the rear flaps DOWN on the left.
2 Pinch the Paper Guide and slide it against the left side of the envelope.
3 Press [Feed Switch] so that the Auto Sheet Feeder Lamp lights.
4 Select [Envelope] in [Media Type], and then select [DL Env.] or [Comm. Env. #10] in
[Page Size].
For information on the printer driver settings, refer to the Printer Driver Guide.
Important
z Envelopes can be used only when printing from a computer.
z Do not use envelopes with embossed or treated surfaces, a double
flap, pressure seals or sticker flaps.
z Select either [DL Env.] or [Comm. Env. #10] according to the envelope
size you are using.
z The printed image will be upside down depending on the application. If
this occurs, open the printer properties dialog box then select the
[Rotate 180 degrees] check box on the [Page Setup] tab.
For information on the printer driver settings, refer to the Printer Driver
Guide.
Important
Ensure that the Cover Guide stands when you load paper in the Auto
Sheet Feeder.
Note
A maximum of 10 envelopes can be loaded at once.
Note
z Fold the envelope flap shut (A).
z Printing direction (B).
2
1
3
(B)
(A)
