A SERVICE OF

logo

6
(1)
(2)
(A)
4
1
2
Install the Ink Tanks
Do not hold the sides of the ink tank; ink may splash.
Pull the orange tape (1) in the direction of the
arrow to peel off the protective film and remove
the film (2) completely.
If the Print Head Holder moves to the right,
close and reopen the Scanning Unit (Cover).
Be sure to use the supplied ink tanks.
Do not handle the ink tanks roughly such
as applying them excessive pressure or
dropping them.
While pressing down with your left thumb, twist
off the orange protective cap (A) located on the
bottom of the ink tank.