3.3 Function Settings
This printer has no function selector for setting functions. Use the Windows driver to
make the respective settings. For details, see the Windows Driver Guide included with
the printer.
3.3.1 Items set by control function
Procedure
1) Open the printer driver control dialog box.
2) Select "Custom Setting" to open the custom setting dialog box.
3) Change the parameter of the appropriate setting. (The item is ON when a check
mark appears in the checkbox.)
Settings
a) ECP mode
This setting selects whether or not to be used ECP mode when printing.
"OFF": No ECP mode (default)
"ON": ECP mode
b) High speed printing
This setting specifies whether or not to print at high speed by reducing the
response of the printer.
"OFF": Normal speed printing
"ON": High speed printing (default)
c) Pause page
This setting specifies whether or not to use the function to prevents ink transfer
between sheets by specifying a fixed waiting time after printing each page.
"OFF": No pause after printing each page (default)
"ON": Pause after printing each page
3-17
BJC-7100
Part 3: Operating Instructions
Figure 3-18 Windows 95 Driver Control Sheet (Sample)
