106
When shooting movies:
1. Set the mode switch to .
2. Turn the control dial to select .
2
Press the button.
•
The camera will switch to Color Input
mode and the display will alternate
between the original image and the
color accent image (using the
previously set color).
3
Aim the camera so that the color you wish to
retain appears at the center of the LCD
monitor and press the button.
• Only one color can be specified.
• Use the or button or turn the control dial to specify the
range of colors that are retained.
4
Press the button to complete the setting,
then shoot.
z The default color accent is green.
z You may not obtain the expected results if you use the flash.
z The specified color accent and color range is retained even if
the camera’s power is turned off.
–5: Only takes the color that you want to retain
+5: Also takes colors close to the one that you want to retain
