![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/5/4e/54e0e971-35aa-4678-beb9-e9e50f0d0065/54e0e971-35aa-4678-beb9-e9e50f0d0065-bg11.png)
SPECIFICATIONS
Carbolite reserves the right to change specifications without notice.
9.1 Models Covered by this Manual
MODEL Max.
Temp.
Max.
Power
Work
Tube
Bore
Work
Tube
Length
Heated
Length
Net
Weight
1
(°C) (kW) (mm) (mm) (mm) (kg)
Split Tube furnaces heated by resistance wire moulded in refractory fibre
Horizontal Models in an opening case
HST 12/--/200 1200°C 1.0 25-100 350- 200 26
HST 12/--/300 1200°C 1.5 25-100 450- 400 29
HST 12/--/400 1200°C 2.0 25-100 550- 400 32
HST 12/--/500 1200°C 2.0 25-100 550- 400 37
HST 12/--/600 1200°C 3.0 25-100 750- 600 41
HST 12/--/900 1200°C 4.5 20-100 1050- 900 60
Vertical Models with a variety of stand and fixing options
VST 12/--/200 1200°C 1.0 25-100 350- 200 25
VST 12/--/300 1200°C 1.5 25-100 450- 400 28
VST 12/--/400 1200°C 2.0 25-100 550- 400 30
VST 12/--/500 1200°C 2.0 25-100 550- 400 33
VST 12/--/600 1200°C 3.0 25-100 750- 600 35
VST 12/--/900 1200°C 4.5 20-100 1050- 900 60
also models based on the above, but of other lengths, supplied to special order
note 1: Weights are approximate and do not include fittings or vertical stands.
9.2
Environment
The furnaces contain electrical parts and should be stored and used in indoor conditions as
follows:
temperature: 5°C - 40°C
relative humidity: maximum 80% up to 31°C decreasing linearly to 50% at 40°C
MF21-3.03 4/10/00 CR
Keison, P.O. Box 2124,
Chelmsford, CM1 3UP, England.
Telephone: (01245) 600560
Int: +44 1245 600560
Facsimile: (01245) 600030
Int: +44 1245 600030
E-mail: info@keison.co.uk
For preventive maintenance, repair and calibration of all Furnace
and Oven products, please contact:
Keison Products
Telephone: UK: 01245 600560 Int: +44 1245 600560
Fax: UK: 01245 600030 Int: +44 1245 600030
Email: info@keison.co.uk
The products covered in this manual are only a small part of the wide range of
ovens, chamber furnaces and tube furnaces manufactured by Carbolite for
laboratory and industrial use. For further details of our standard or custom built
products please contact us at the address below, or ask
our nearest stockist.